Factory Address: No. 188, Xinhai Street, Fushan high-tech industrial development district, Yantai, Shandong, China
【Introduction】: SF flotation cell is a mechanical agitation type flotation equipment with self-slurry suction and self-air suction
【 Capacity 】: 0.37～20m3
【Improvement】: Both sides of the impeller with back rake blades ensures double circulating of slurry inside the flotation tank. Forward type tank, small dead end, fast foam movement
【Introduction】: A self-air suction mechanical stirring floatation cell without slurry suction (Referring to the design of USA wemco flotation machine)
【 Capacity 】: 4～20m3
【Improvement】: Shallow groove, the stator lower than the impeller, large slurry circulation volume, low energy consumption; the stator is a cylinder with an elliptical hole which is conducive to the dispersion and mixing of pulp and air. Umbrella shaped dispersion cover with hole keeps the pulp surface stable.
【Introduction】: A mechanical agitation type floatation cell unit with self-air suction and combination of slurry suction/no slurry suction
【 Capacity 】: 0.15～ 24m3
【Improvement】: BF flotation cell has two types: type I and type II. Type I is improved as suction cell referring to model SF; type II is improved as direct flow cell referring to model JJF. Both are briefly called model BF.
【Introduction】: An air inflation mechanical agitation floatation cell with slurry suction（as suction cell of KYF floatation cell).
【 Capacity 】: 1～38m3
【Improvement】: The features of structure and performance of the cell is similar to KYF flotation cell. The difference is that there is a stator specially set above the impeller to form a special negative pressure area. It has the function of automatic suction slurry with a little higher energy consumption.